[. . . ] Pull up both speakers outwards.
AN-PR1000H
HOME CINEMA SYSTEM
This quick Start Guide will help you to correctly install and operate your system.
Protection sheet
1
Accessories
Top glass cover x 1 Glass shelf x 1
3. [. . . ] Stick the metal frame cushion onto the metal frame and place the glass shelf on top of it. Top glass cover Sticker up side
Top glass cover cushion
Metal frame cushion
Metal frame screws (M6 x 20 mm) x 4 Metal frame x 1 Metal frame cushions x 8
Glass shelf
Sticker up side Notes: . Metal frame must not be removed to ensure safety.
Support wire screws (M6 x 30 mm) x 2 Washers x 4 Support wire screws (M6 x 12 mm) x 2
Safety wires x 2
Wire clips x 5
3
AC power lead x1 "AAA" size battery (UM-4, R03, HP-16 or similar) x 2 FM aerial x 1
Subwoofer connection
4
Connecting the AC power lead
After checking all the connections have been made correctly, connect the AC power lead to the AC power input socket, then to the wall socket.
Remote control x 1
Speaker wire AC power lead x 1 ( for users in Australia only )
Wall socket (AC 220 V - 240 V, 50 Hz)
Batteries not included for users in Australia
Speaker terminal
(for users in Australia only)
5
To turn the power on
Press the ON/STAND-BY button. If the power does not turn on, check whether the power lead is plugged in properly. [. . . ] Note: After the unit enters the power stand-by mode, wait a few seconds to turn on again.
TINSEA148AWZZ 06G R AS 1 [. . . ]